COOLING PLENUM CHAMBER. Air Intake SCAT Hose #3

coolingplenumchamberairintakescathose3.jpg

I removed the excess material with a sanding disc on the air grinder so that both ends would align with each other and the part would fit inside the hose. I placed it inside the hose, immobilized the joint with spots of hot glue on the outside and laid a 2-BID strip with peel-ply on the inside of the cylinder for a perfect fit inside the SCAT hose. Once cured, I finished with one BID on the outside. I cut the cylinder in sections, as needed, to fabricate the actual hose flanges for the runner and the air filter box.

Photo album created with Web Album Generator