INSTRUMENT PANEL. Zaon XRX PCAS Installation

instrumentpanelzaonxrxpcasinstallation.jpg

The Zaon XRX PCAS arrived together with the AvMap EKP IV Navigator after I had painted the panel. I decided to install it permanently on the panel. I made a base out of aluminum and reinforced it with a foot that I bonded and riveted to it. I made an opening at the top of the panel for the display to show. The antenna stays above any metal on the panel and will protrude through the fiberglass glareshield. The unit is held firmly in place by three Velcro circles and a couple of nylon zip ties.

Photo album created with Web Album Generator