LIGHTS. Nav / Strobe Lights #2

lightsnavstrobelights2.jpg

I made a small template of the wingtip module and decided on the definitive position. I drew a reference line (0° incidence) on the wingtip. I transferred the size and location of the wire holes in the back of the unit to the wingtip and opened them with a grinding bit and a sanding drum on a Dremel tool. I sawed between both wire holes with a handsaw and widened the line with the help of a grinding bit on the Dremel and a flat file. I then positioned the module in place and marked the holes for the screws on the reference line by slightly rotating the unit and scratching the surface with the unit’s screws themselves. I then opened the holes where the scratch and the reference line crossed.

Photo album created with Web Album Generator