INSTRUMENTS. Pitch Autopilot Servo Installation #2

instrumentspitchautopilotservoinstallation2.jpg

Here is the pitch servo linkage I designed based on the generic servo installation kit from Dynon. It is missing the connecting female threaded aluminum tube between the two rod ends. Instead of a bracket, I used a ¼” threaded rod end (78,000 psi) that crosses the torque tube inside a bushing and is kept in place with washers, split washers and torque nuts on both ends. The rod is long enough so that the arm length (axis–rod) may be adjusted.

Photo album created with Web Album Generator